Make sure that it does not get tangled on the filament spool.

Now you can easily pull out the filament.

If the nozzle is still cold, the Mega S will tell you that it will automatically raise the temperature to melt the filament in the nozzle. Or you can go directly to the filament menu and press “Filament Out”.Of course, this only works for the filaments mentioned or those that have a similar melting temperature. You use the “Preheat” function for PLA or ABS.You enter the temperature for the nozzle manually.Therefore, you must first bring the nozzle to a temperature at which the filament melts. If you don’t do this, a small amount of filament will stick in the nozzle and you won’t be able to pull out the old filament. In order to remove the old filament, it must first be heated up in the nozzle. How to Change the Filament Step by Step Step 1: Heat up the Nozzle So if you want to remove your filament after a print or then reinsert it, you can also use this step-by-step guide by simply ignoring the relevant steps. This way you protect it from moisture.Īnd then you have to change it even if it’s the same filament roll when you start printing again. It is also advisable to store the filament after each print if you do not want to print for several days. You have to change the filament whenever you want to use a different color or material. 3.3 What are the best settings for PLA on the Mega S?.3.1 Which filaments can be used with the Anycubic Mega S?.2.7 Step 7: Start Printing or Let it Cool Down.

2.6 Step 6: Remove the Extruded Filament.

2 How to Change the Filament Step by Step.

Megasync uninstall hanging